이인환 최해남 2020-08 30115 https://aurora.ajou.ac.kr/handle/2018.oak/19832 학위논문(석사)--아주대학교 일반대학원 :에너지시스템학과,2020. 8 Rod-Coil 블록 공중합체를 RuPhos Pd 촉매를 이용한 Suzuki-Miyaura catalyst-transfer polycondensation (SCTP) 방법을 이용하여 coil-first/grafting from 접근법으로 새로운 합성법을 개발하였다. 처음 atom transfer radical polymerization (ATRP) 방법을 통해 polystyrene (PS)을 중합하였고 azidation, click 반응을 통해 end group modification하여 coil-type macroinitiator PS (P1)을 합성하였다. 그 후 boronate에 N-methyliminodiacetic acid (MIDA) protecting group를 도입한 3-hexylthiophene monomer (M1)를 이용하여 RuPhos Pd-catalyzed SCTP를 실행했다. 그 결과 well-defined polystyrene(PS)-block-poly(3-hexylthiophene) (P3HT)을 뛰어난 control, 높은 수율로 얻는데 성공하였다. 또한 coil-type macroinitiator의 종류를 넓혀 poly(methyl acrylate) (PMA), poly(methylmethacrylate) (PMMA)를 이용하여 같은 방법으로 poly(methyl acrylate)-block- poly(3-hexylthiophene) (P4), poly(methylmethacrylate)-block- poly(3-hexylthiophene) (P6)을 합성하는데 성공하였다. 이 방법을 응용하여 기존 rod first approach에 이어서 coil block을 합성한 뒤 P3HT와 다른 rod block인 poly(3-ethylhexylthiophene) (P3EHT)을 중합하여 기존에 없던 ABC type의 rod-coil-rod triblock copolymer (P10)를 합성하는데 성공하였다. 하지만 반복되는 end group modification으로 인한 end group fidelity의 부정확성 때문에 반응에 참여하지 못하고 남은 first block이 존재하였다. 이를 극복하기 위해 bifunctional initiator를 준비하여 bromide end group을 제거 한 macroinitiator를 통해 보다 효율적인 coil-type macroinitiator (P14) 전략을 제시하였다. 뿐만 아니라 coil block에 유기용매에 대한 용해도가 좋지 않은 전도성 고분자 polythiophene (PT)을 coil block 고분자에 SCTP 방법으로 중합함으로써 in situ nanoparticlization conjugated polymer (INCP) (P18) 하였고 산 처리한 결과 polythiophene nano dot을 형성하는데 성공하였다. 1. Introduction 1 2. Result and Discussion 5 (1) Rod-coil diblock copolymer의 합성 5 (2) Rod-coil-rod triblock copolymer의 합성 15 (3) Bromide end group을 제거한 ATRP coil-type macroinitiator에 대한 고효율direct RuPhos Pd-catalyzed SCTP 19 (4) Polythiophene nano dot을 위한 acetal 구조 block 공중합체의 in situ nanoparticlization of conjugated polymers (INCP) 28 3. Conclusion 36 4. Experiment section 38 (1) 모노머 M1, M2, M3의 합성 38 (2) 1-iodo-4-((prop-2-ynyloxy)methyl)benzene (A1)의 합성 40 (3) 고분자의 중합 41 5. Reference 63 kor The Graduate School, Ajou University 아주대학교 논문은 저작권에 의해 보호받습니다. Suzuki-Miyaura Catalyst Transfer Polycondensation (SCTP) 방법을 이용한 Rod-Coil Block Copolymer의 합성 Thesis 아주대학교 일반대학원 일반대학원 에너지시스템학과 2020. 8 Master I804:41038-000000030115 http://dcoll.ajou.ac.kr:9080/dcollection/common/orgView/000000030115 Rod-Coil 블록공중합체 고분자 전도성 고분자 Herein, we report a novel synthetic route for conjugated rod coil block copolymers from the coil type macroinitiator. Initially, polystyrene was prepared by atom transfer radical polymerization, and its end group was converted to aryl iodide to be used as the macroinitiator for RuPhos Pd catalyzed Suzuki Miyaura catalyst transfer polycondensation (SCTP). A fter that, with this PS macroinitiator P1 )), SCTP of MIDA functionalized 3 hexylthiophene monomer M1 afforded polystyrene block poly(3 hexylthiophene) P2 with control over molecular weight and low dispersity. Furthermore, we carried out the same polyme rizations using other types of coil type macroinitiators including poly(methyl acrylate) P3 ) and poly(methyl methacrylate) P5 )), and this also resulted in corresponding conjugated rod coil block copolymers with low dispersity. Moreover , with the developed method, we synthesized a unique ABC type triblock copolymer P10 that was hard to be obtained by previous polymerization protocols. After that, we report a more sucessful synthetic route for rod coil block copolymers by bifunctional initiator (Ini1). Thi s route offers coil type macroinitiators (PMMA, P14 ) that have a high end group fidelity. We sucessfully synthesized a rod coil block copolymers (PMMA b P3HT, P15 ) via SCTP using P14 . Finally, we synthesized bifunctional acetal initiator (Ini2). Then, poly styrene ( P17 ) was prepared by ATRP. The coil type macroinitator ( P17 ) was conducted SCTP and in situ nanoparticlization of conjugated polymers (INCP). Then we got polystyrene(PS) b polythiophene (PT) ( P18 ) and nano PT dot by deprotection of acetal group.