The Geyser boiling phenomenon (GBP) is unstable behavior inside a two-phase closed thermosyphon (TPCT). The mechanism of GBP occurrence is still not clearly understood. Therefore, understanding GBP is not just an academic pursuit but is essential for designing the TPCT. Based on the visualization, the GBP was defined, and a novel experiment with synchronized measurement among temperature, pressure, and force analyzed the mechanism of GBP. Experiments were taken to understand GBP by varying filling ratios (50 %, 75 %, and 100 %) of working fluid and heat fluxes. The results showed that a sufficient liquid layer at the top of the bubble is required for GBP to occur and that the bubble growth rate affects the thickness of the liquid layer. When GBP occurred, the average force was at least 0.5 N, but in some cases, an average force of 1 N or more appeared under the condition that GBP did not occur. When the frequency of the force was high, even a small average force could make a significant cumulative force. This study provides valuable information for numerical analysis based on the quantitative forces measured by the load cell, opening a new perspective on the safety and reliability of TPCTs.
This work was supported by the Innovative Energy Efficiency R&D Program of the Korea Institute of Energy Technology Evaluation and Planning (KETEP) grant funded by the Ministry of Trade, Industry & Energy, Korea . (Grant No. 20212020800270 ), and a National Research Foundation of Korea (NRF) grant funded by the Ministry of Science and ICT, Korea (No. NRF-2020R1A2C3008689 ).
