In this work, an equiatomic Ti-V-Al-Nb-Hf high-entropy alloy (HEA) was designed by thermodynamic simulation and prepared experimentally via a powder metallurgy approach. A nanoindentation and nano scratch technique was used to study the mechanical and friction behavior of the HEA. The results revealed that a nano hardness of 7.39 ± 0.4 GPa and an elastic modulus of 140.75 ± 6.3 GPa was achieved. The coefficient of friction (COF) and creep behavior of the alloy were studied by scratch tests in ramping mode under constant-loading conditions. The COF quickly increased as the normal load increased at the beginning stage of creep performance. Additionally, three-dimensional modeling was performed to obtain a graphical representation, which can be used to explore the morphology and geometry of the scratched track. From the experimental findings, the creep behavior of the alloy is classified into two separate regimes: transient and steady-state regions. The present study demonstrates the scratch and creep behavior of the HEA in the context of the scratch mechanisms.
The authors would like to thank Dr. Vinod Kumar, Associate Professor at IIT Indore, and Mr. Sandeep Jain, Ph.D. scholar at IIT Indore, for their help in thermodynamic simulation. This work was supported by the National Research Foundation of Korea (NRF) grant funded by the Korean government (MSIT) (2021R1A2C1005478). This research was supported by Basic Science Research Program through the National Research Foundation of Korea (NRF) funded by the Ministry of Education (2022R1I1A1A01053047 and 2021R1A6A1A10044950). This research was supported by Global - Learning & Academic research institution for Master\\u2019s\\u00B7PhD students, and Postdocs (LAMP) Program of the National Research Foundation of Korea (NRF) grant funded by the Ministry of Education (RS-2023-00285390).
