In this study, kenaf, a fast-growing plant, was pyrolyzed to biochar, and the biochar was impregnated with aluminum to improve its fluoride adsorption capacity. The Al-impregnated kenaf biochar (Al-KNF-BC) was pyrolyzed at temperatures of 300–700 °C, where the specimen treated at 300 °C (Al-KNF-300) demonstrated the highest fluoride adsorption capacity. The kinetics and equilibrium adsorption of fluoride by Al-KNF-300 followed the pseudo-second-order and Langmuir models, respectively. According to the Langmuir model, the maximum fluoride adsorption capacity of Al-KNF-300 was 13.93 mg/g. The enthalpy and entropy of fluoride adsorption by Al-KNF-300 were 37.80 kJ/mol and 124.1 J/mol K, respectively. Fluoride adsorption by Al-KNF-300 was favorable at pH values as low as 3, and the effect of anion competition followed the order HCO3− > SO42− > NO3− > Cl−. A maximum adsorption efficiency of 99.23% was obtained at an adsorbent concentration of 16.67 g/L, at which point the fluoride concentration decreased from 100 to < 1.5 mg/L (the drinking water standard). Based on these results, Al-KNF-300 can be considered an effective and inexpensive adsorbent for removing fluoride from contaminated water to meet drinking water standards.
C.E. Torres-Aguilar, CVU 855002, acknowledges the financial support provided by the Consejo Nacional de Ciencia y Tecnología (CONACYT) to pursue a Doctorado en Ciencias en Ingeniería Mecánica.The author(s) disclosed receipt of the following financial support for the research, authorship, and/or publication of this article: This work was supported by the National Technological Institute of Mexico [Project: 5320u4; code 10511.21-P].
